免费注册 登陆 
主页 >> 最新求购采购信息 Buyingleads >> 礼品工艺品 >> Buy Ballistic Helmet
采购内容

Buy Ballistic Helmet

详细内容

Dear Sir,

We are looking for Military Ballistic Helmet 25000 pieces for U.A.E. Armed Forces.
Its specification and certifications are required by the Armed Forces as shown here under.

Please quote, if you are meeting the exact specification as given and NATO quality cercifictions are obtained for your Products.

Please provide full details for Prices, delivery and condition of items.
NATO NSN for each items.
Correct Parts Numbers
S & H fees and shipping charges.
Cerificate of Origin.
Original Manufacturer Certificate.
Certificate of Conformity
Warranty Certificate

QUALITY REQUIREMENTS,
Weight of the helmet, because of light meterials, the wight of helmet satisfy the PQP if don't.
Size. Marks. Weight.
53-59 cm M 1450 gms
60-62 cm L 1650 gms.

SHAPE STABILITY.
Shape stability is to be ascertained through measuring of Helmet deformation under pressure inthe ear axis.
Elastic (temporary) deformation measured in the ear axis as gap (space) before and after pressure should not exeed 40mm. Plastic (Permenant, residual) deformation after pressure, measured in the ear axis should not exceed 5mm.

BALLISTIC PROTECTION V50.

The Helmet must reach Ballistic Protection against 1,102 g fragments according to stanag 2920 at least to the speed of 650 m/s on the point of the impact.

DYNAMIC SUBSIDENCE(DYNAMIC TRAUMA)

The Helmet must fulfil the requirement to the resistance against dynamic deformation by the impact with 1.102 g fragment simulation according to STANAG 2920.
The requirement is to fulfil if the projectile with the 90% of the projected speed on the target(90% of 650=585m/s) cuase not more than 20mm bulge inside of the shell.

RESIDENCE ON PARA 9MM.

The Helmet Must stop the ammunition 9mm x19mm Para FMJ shoooted in the crown of Helmet with the speed of 400=10m/s.
The bullet should not penetrate the shell.

HOLDING OF THE EDGE OF HELMET.

Profile rubber must stand the power of 8 N during 2 minutes without secession.

STORAGE AND DURABILITY.

Storage.

The Helmet must be able to store in conditions from -35 degree centigrade to + 650 degree centigrade and relative humidity of air from 100%. At this conditions Helmet will keep own characteristics.

DURABILITY.

Original packing Helmet by regular storage should be protected to 10 years.
At normal use, the duration term of shell is 4 Years, and inside equipment 2 Years. After 4 Years of normal use, the Helmet will keep 90% of Ballistic characteristic of new Helmet.

ATTACHMENTS REQUIRED
Manufacturer Protocols and Meterial Certifications from Producers.

Scheme of gunshot by Ballistic tests.
Ballistic test reports of raw shell.
Ballistic test report of shell.
Test report of shape stability.
Test report of final edge stichness.
Meterials Certificates from Producers.

We are expecting your reply soon.

Thanks and Best Regards

Country:UAE
/手机



联系方式 Co:Digital Security Solutions. L.L.C.
Add:Abu Dhabi. U.A.E.
Tel:00971 2 6729676
Fax:00971 2 6728758
Email:digital@emirates.net.ae
Moblie:00971 50 4448625 LinkMan:Gangadhar
   

 

Copyright ? 2008 Todaytex Co.,Ltd All rights reserved.