|
|
| 采购内容 |
Buy Stainless Steel 316l Rods, Sheets For Medical Implants |
| 详细内容 |
Stainless steel 316l for medical implants
Standard: ISO -5832-1 (or)
ASTM-f-138-3 (or)
Din. 1.4441
(nickel: Min. 14 % max. 16%, molybdenum: Min 2.35 max 4.2, phosphorous: Max. 0.025 )
Below is a trial order quantity.
Bulk requirement is more & repeats.
Rods
Ss 316l as per ISO-5832-1 standards cold worked
Minimum length of each rod: 3 [preferred]
Dia quantity
1. Dia - 6mm - 1000 kg
2. Dia - 8mm - 1500 kg
3. Dia -13mm - 1000kg
4. Dia -18mm - 1000kg
Sheets: Cold rolled
Ss. 316l as per ISO 5832-1 standards cold worked sheets
Width of each sheet/plate: 1 meter
Length of each sheet/plate: 1 meter or longer standard
5. Thickness -1.5mm. X. 1. Mtr. X. 1.5mtr: 1 no.
6. Thickness -2.0mm. X. 1. Mtr. X. 2.0mtr: 1 no.
7. Thickness -2.5mm. X. 1. Mtr. X. 1.5mtr: 8 nos.
8. Thickness -3.0mm. X. 1. Mtr. X. 1.5mtr: 3 nos.
9. Thickness -3.2mm. X. 1. Mtr. X. 1.5mtr: 6 nos.
10. Thickesss - 3.5mm. X. 1mtr. X. 1.5mtr: 6 nos.
11. Thickness- 4.0mm. X. 1mtr. X. 1.5mtr: 5 nos.
12. Thickness- 4.5mm. X. 1mtr. X. 1.5mtr: 2 nos.
13. Thickness- 5.0mm. X. 1mtr. X. 1.5mtr: 4 nos.
14. Thickness- 6.0mm. X. 1mts. X. 1.5mtr: 2 nos.
Tubes
Tube as per ISO 5832-1 standards
Length desired: Minimum 3 m
15. Tube od/ID 13/8mm: 500 kg
17. Tube od/ID 8/2mm: 200 kg
18. Tube od/ID 6/1.5mm: 100 kg
19. Tube od/ID 13/4mm: 300 kg
Profiles strip
[drawing can be sent]
Width thickness radius(internal)
Mm mm mm
10.2 3.2 10
12.2 4.0 25
16.2 4.5 25
11.2 3.5 10
13.7 4.6 25
17.7 6.0 25
9.2 1.5 53
10.2 2.8 25
12.2 2.8 25
11.2 1.5 4.5 & 4.9mm
Most important note
We request:
[1] by e-mail quality test report giving chemical composition and mechanical properties. And after acceptance of test reports
[2] [by courier] samples pieces for our thorough evaluation before bulk supply.
Samples required:
A) rods: Any dia. X 150mm long: 2 nos.
B) sheet: 2 pieces of any thickness between 3 & 5 mm x minimum width 13.2 mm x 150mm long
C) tube: 150 mm, any diameter: 2 nos.
Country:India
/手机
|
| 联系方式 |
Co:Metals Machinery Technologies Co.,
Add:D-3, 3643 Vasant Kunj, New Delhi, Delhi
Tel:91-11-65374445
Fax:91-11-46024004
Email:aktaneja2000@yahoo.com
Mobile:91-9312997667
LinkMan:Mr. A. K. Taneja |
| |
| |
|
