|
|
| 采购内容 |
Buy Copper Nickel Alloy |
| 详细内容 |
We have a new enquiry and, although the initial volumes are low, we need to accept any possible business during this recession.
Details forwarded are as below.
CuNi Alloy to have bending qualities and when satin or mirror polished, finish to match that of stainless steel.
Minimum Cu to be 65%, and perhaps Zn can be added to compensate if technically OK.
3/4 x 1.5mm wall thickness Tube in 3m lengths - must be imperial dimensions not 19mm - initially can take 100 lengths but willing to accept minimum quantity if reasonable.
Also 3/4 solid bar cut to 3 m - must be imperial dimensions not 19mm - initially can take 1 no. tonne, or again minimum quantity if reasonable.
0.7 thick sheet 2x1m or 1m SQ. or if strip 85 mm and 60mm wide 1m or 2m long strips (advise Kg/m, and Kg/m Sq for 0.7 sheet) - combined 100 Kg initially or again please advise minimum quantity
If you can match these properties, then we would immediately require a small sample of similar approx. size for polish trial to assess colour match etc.
They intend to produce handles and other door furniture from the material as the properties of the metal are excellent for bacteriological control in hospitals etc.
If the material is not covered by your business, grateful for suggestions re suitably qualified companies.
Longer term projections would envisage production of finished articles.
Look forward to your comments.
Kind regards
Country:United Kingdom
|
| 联系方式 |
Co:Save Group
Add:Steppes House, Hope under Dinmore, Leominster, Herefordshire, United Kingdom HR6 0Pp
Tel:44-01568-611-729
Email:joe@savewithcollison.co.uk
LinkMan:Mr. Joe Collison |
| |
| |
|
