|
|
| 采购内容 |
Buy Sheets Of Fr4 G10 |
| 详细内容 |
I am looking for G10 FR4 glass epoxy laminate one sheet each of 36 x 48 in following thicknesses (or the closest standard thickness):
G10 FR4 36 x 48 x 0.125
G10 FR4 36 x 48 x 0.093
G10 FR4 36 x 48 x 0.062
G10 FR4 36 x 48 x 0.048
G10 FR4 36 x 48 x 0.031
Linen Phenolic 36 x 48 x 0.125
In my original RFQ I state that I am looking for 1 (one) sheet of each material. Can you sell one sheet of each material?
Also, do you have a capability of cutting a 36 x 48 sheet to smaller pieces?
If you can, is there additional cost to cut it, and how much would it cost?
For FR4 Copper Clad, I am looking for one sheet each in following thicknesses/copper weight:
36 x 48 x 0.125 2oz double sided copper clad
36 x 48 x 0.093 2oz double sided copper clad
36 x 48 x 0.062 2oz double sided copper clad
36 x 48 x 0.048 2oz double sided copper clad
36 x 48 x 0.031 2oz double sided copper clad
36 x 48 x 0.018 - 0.022 2oz double sided copper clad
36 x 48 x 0.125 1oz double sided copper clad
36 x 48 x 0.093 1oz double sided copper clad
36 x 48 x 0.062 1oz double sided copper clad
36 x 48 x 0.048 1oz double sided copper clad
36 x 48 x 0.031 1oz double sided copper clad
36 x 48 x 0.018 - 0.022 1oz double sided copper clad
36 x 48 x 0.125 2oz single sided copper clad
36 x 48 x 0.093 2oz single sided copper clad
36 x 48 x 0.062 2oz single sided copper clad
36 x 48 x 0.048 2oz single sided copper clad
36 x 48 x 0.031 2oz single sided copper clad
36 x 48 x 0.018 - 0.022 2oz single sided copper clad
As with the uncladded G10 FR4 I am looking for 1 (one) sheet of material in each thickness, and also, do you have a capability of cutting sheets of 36 x 48 FR4 CCL sheets to smaller pieces?
If you can, is there additional cost to cut it, and how much would it cost?
Thank you
Country:USA
联系形式:公司/电邮
|
| 联系方式 |
Co:RF TEST SYSTEMS
Email:rftestsystems@gmail.com
LinkMan:Jack Brown |
| |
| |
|
