|
|
| 采购内容 |
Buy Plastic Recycling Machine |
| 详细内容 |
The following is what we require for the Recycling Machine:
Standard Features
Production Rate up to 1 - 2 tons MSW or other waste materials, hard drives, passenger tires, scrap, plastic, paper etc
Shaft Center Distance: 8.3
Dual Drive - Electric & Hydraulic
Infeed Opening - Starting @ 20 x 24
Hopper - Standard or Ram Feed Hopper
Controls: UL and/or CE approved PLC Controller and Soft Start Motors
HP Optional (Typically up to 40 HP but can be increased)
Shaft Material - 4140 or 4340 Hardened Alloy Steel
Shear Shredder - Model 44-4515
Main Motor for Rotor - (HP / KW) - Standard 15 HP - 11 KW (UP to 40 HP)
Shaft Center Distance (inches / mm) 8.3 inches / 210.82mm
Output Per Hour - Solid Waste Up to 1.5.Tons per Hour
Dual Drive Electric & Hydraulic
Shaft Size for Hex Shaft (inches / mm) 3 inches - 76.2mm
Cutter Diameter (inches / mm) 9.3 Inches - 236.22 mm
Cutter Thickness on Standard Machine (inches / mm) 1.5 inches - 38.1 mm
Lowest RPM of Shafts on Standard Machine 4
Length of Smallest Infeed Opening - (Inches / mm) 24 / 609.6 mm
Width of Smallest Infeed Opening - (Inches / mm) 20 / 508 mm
Maximum Special Design Infeed Opening - (Inches / mm) 42 inches / 1066.8 mm
Length of Shredder Floor Plan - (Inches / mm) 60 / 1524 mm
Width of Shredder Floor Plan - (Inches / mm) 40 / 1016 mm
Height of Shredder Floor Plan - (Inches / mm) 55 / 1397 mm
Shaft Material 4140 or 4130 Hardened Alloy
Cutter Material 4140. 4340 or D2 Steel
Passenger Tires per Hour from Reported Facilities 50
Machine Weight / Approx: - (lbs / kg) 4,500 lbs / 2045 kg
Country:USA
|
| 联系方式 |
Co:Architectural Interiors
Add:1520 N Resler Dr. STE C, El Paso, USA
Tel:1-915-4746000
Fax:1-915-5811411
Email:alejandra@intelexis.com
LinkMan:Ms. Alejandra Orozco |
| |
| |
|
