Buy Multi Frequency Crystal Oscillator
Multi Frequency Crystal Oscillator in a small package such as a dip or SMT dip package.
Voltage requirements, +5 volt.
Oscillator output must be TTL compatible.
Control pins must be TTL compatible.
Each output frequency should have it's own assigned pin.
Frequency should be selectable by applying +5 volts to it's assigned pin.
Output frequencies required are;
Output frequency must be stable to +/-20ppm.
The output must be on a single pin.
The output frequency must be able to be pulled +/- 10KHz by varying a voltage of 0.5 to +8.0 volts to a designated pin.
Pin assignment layout is not critical. We can design the PC Board aroud the oscillator.
Stamping will be LESCOMM 15MMFO
Please email for more details.
Co:Lester s Custom Truck Shop|
Add:674 Ridgestone St, Suite B, Orange Park, Florida
Mobile:1-904-6880414 LinkMan:Mr. Lester Jernigan